5 Packs ANSI CE Certified Reusable Protective Safety Clear Visor Face Shield with Comprehensive Brow Guard

If the protective film on face shield is not easily accessible with your fingers, you can use adhesive tape to help remove the protective film from your Safety Clear Visor Face Shield. Here's how:

Cut a Piece of Tape: Start by cutting a piece of adhesive tape, such as masking tape or packaging tape, to a size that's easy to handle and work with.

Apply Tape to Corner: Place one end of the adhesive tape onto one corner of the protective film. Press it down firmly to ensure it adheres to the film.

Lift the Tape: Gently lift the end of the tape that's not adhered to the film. As you lift the tape, it should also lift the corner of the protective film along with it.

Peel Off the Film: Slowly pull the tape at a shallow angle, almost parallel to the visor. The adhesive nature of the tape should help peel off the protective film without leaving much residue behind.

Repeat the Process: If necessary, cut another piece of tape and repeat the process for other corners or edges of the protective film. Gradually peel off the film from different sides until it's completely removed.

Check for Residue: After removing the film, inspect the visor for any remaining film or particle that is left behind. If you notice any, you can use a soft, damp cloth to gently wipe the visor and remove it.

Using adhesive tape can be a helpful method, especially if the protective film is not easily accessible with your fingers. Just remember to use the tape gently and avoid using excessive force to prevent damaging the visor. If you're unsure about the process or encounter any difficulties, please contact us for assistance.

To remove the protective film from your Lucent Path Safety Clear Visor Face Shield, follow these steps:

Find the Film Edges: Examine the edges of the face shield to locate the edges of the protective film. It's a thin, clear plastic layer that covers the shield's transparent visor.

Use Your Fingernail or a Tool: Gently lift one corner of the protective film using your fingernail.

Peel off the Film: Once you have a corner lifted, slowly and gently peel the protective film away from the visor. Pull the film at a shallow angle, almost parallel to the visor.

Dispose of the Film: After successfully removing the protective film, discard it in an appropriate trash bin.

Inspect for Residue: Check the visor for any leftover film or particles. If you notice any, you can use a soft, damp cloth to gently wipe the visor, making sure not to scratch it. Dry the visor with a clean, dry cloth.

Remember that the key is to be patient and gentle while removing the protective film to avoid damaging the visor. If you're unsure about the process or encounter any difficulties, please contact us for assistance.